Научно-исследовательский сайт Вячеслава Горчилина
Один D-типа флип-флоп; по положительному фронту триггер
PanasonicСкачать документацию на 74LVC1G80pdf
PhilipsСкачать документацию на 74LVC1G80pdf

Применение этого электронного компонента в различных схемах
  • SN74LVC1G86 Single 2-Input Exclusive-OR Gate (Rev. P) — SN74LVC1G86 Single 2-Input Exclusive-OR Gate. 1 Features. •1 Available in the Texas Instruments NanoFree™ Package.
  • Single Schmitt trigger buffer — The 74LVC1G17 provides a buffer function with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined outputs. The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a mixed 3.3 V and 5 V environment.
  • SN74LVC1G3157 SA602 и ДПФ согласование | Форум — По моему, это схема ДПФ для СДР трансивера. А там к ним чуть другие требования. Так как в СДР полностью отсутствует зеркальный канал, то и подавление всех компонентов за полосой пропускания на 30-40 дБ, это уже...
  • Single-Pole Double-Throw Analog Switch (Rev. H) — The SN74LVC1G3157 can handle both analog and digital signals. The device permits signals with amplitudes of up to V.
  • Скачать 74lvc1g80_1.pdf - Интегральные микросхемы 74HCxx lvc... — Скачать 74lvc1g80 1 pdf.
  • General description | 74LVC1G04 — The 74LVC1G04 provides one inverting buffer. Input can be driven from either 3.3 V or 5 V devices. These features allow the use of these devices in a mixed 3.3 V and 5 V environment. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall time. This device is fully...
  • General description — The 74LVC1G80 provides a single positive-edge triggered D-type flip-flop. Information on the data input is transferred to the Q output on the LOW-to-HIGH
  • SN74LVC2G17 Dual Schmitt-Trigger Buffer (Rev. N) — SN74LVC2G17 Dual Schmitt-Trigger Buffer. 1 Features. •1 Schmitt-Trigger inputs provide hysteresis • Available in the Texas Instruments.
  • 74LVC1G14 — The 74LVC1G14 is a single 1-input Schmitt-trigger inverter with a standard push-pull output. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed-voltage environment. The device is fully specified for partial...
  • SN74LVC1G3157 Single-Pole Double-Throw Analog Switch (Rev. J) — The SN74LVC1G3157 device permits signals with amplitudes of up to VCC (peak) to be transmitted in either direction. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.